Electrical components, fittings, pressure gauges, etc.
The request of water inlet 1.Conductivity rate≤500µs/cm
3.Temperature 5 - 40°C
4.Pressure 1.5 - 3 kg/cm2
5.PH 6 – 8
Best working condiction 1.Temperature 25°C
General power: 2.2 kw
Notice: The capacity change with the water temperature; mostly, if the water temperature drops every 1°C, the capacity decreases 3%.
The RO system should work once every day. If it does not work in one week, it must be protected by some measure, or the service life of the membrane will be serious affected.
This is the RO system for producing drinking. The producing capacity is 1000L/H. The water supply is tap water. The water is first being removed the suspended matter, micelle and other impurity by the quartz sand filter. Then it is being got rid of the organic substance, chlorine, chromo, odor and etc by the active carbon filter and softener filter. The above device composes the consummate pretreatment system. The water which is being pretreated reaches the requirement of the RO system. So as to make the RO equipment run stably during a long period.
The abio-salt, organic substance, bacteria, heat source and other impurity in the water have been removed after the water was being treated through RO system. The ratio of salt-doffed is in the range of 97%-99%.
There are two modes of operation in the system: auto and manual. The system runs automatically by adopting Water Sensor, and Pressure Sensor. The system can produce water automatically in the mode of auto. It is friendly used and safe.